| ★ wanayoo — archive 1999 http://cisco.com/univercd/cc/td/doc/pcat/109.htm | Nouvelle recherche | Portail wanayoo |
|
|
The Cisco 3600 series is a multifunction platform that combines dial access, routing, and LAN-to-LAN services and multiservice integration of voice, video and data in the same device. The Cisco 3600 series includes the Cisco 3660, the Cisco 3640, and Cisco 3620 multiservice platforms . As modular solutions the Cisco 3660, the Cisco 3640, and Cisco 3620 have the flexibility to meet both current and future connectivity requirements. The Cisco 3600 series is fully supported by Cisco IOS software, which includes analog and digital voice capability, ATM access with T1/E1 IMA or OC-3 interfaces, dial-up connectivity, LAN-to-LAN routing, data and access security, WAN optimization, and multimedia features. The Cisco 3660 has six network module slots; The Cisco 3640 has four network module slots; the Cisco 3620 has two slots. Each network module slot accepts a variety of network module interface cards, including LAN and WAN mixed media cards supporting Ethernet, Fast Ethernet, Token Ring, and a variety of WAN technologies. These cards provide the foundation of LAN and WAN connectivity on a single, modular, network module. Additional applications are supported with a series of network module cards offering digital modems, asynchronous and synchronous serial, ISDN PRI, and ISDN BRI interfaces. In addition to the 6 network module slots the Cisco 3660 has 2 internal Advanced Integration Module (AIM) slots for applications such as hardware accelerated compression and the chassis incorporates 1 or optionally 2 integrated 10/100 (Ethernet/Fast Ethernet) ports. The Cisco 3600 series shares network modules, WAN Interface Cards, and Voice Interface Cards with the Cisco 2600 series. The Cisco 3600 series shares WAN Interface Cards with the Cisco 1600 and Cisco 1700 series.
Figure 5-82: Cisco 3640 Router Rear View
Figure 5-83: Cisco 3620 Router Rear View
The Cisco 3660, Cisco 3640, and Cisco 3620 routers support the following network applications and services: Analog and digital voice services The voice/fax network modules for the Cisco 2600 and Cisco 3600 series multiservice access routers enable packet voice technologies including VoIP and VoFR. Cisco"s voice solutions provide the means for integrating both voice and data within a single network and allow users to take advantage of services, such as toll-bypass, without sacrificing voice quality. The digital T1/E1 Packet Voice Trunk Network Module provides a flexible and scalable T1/E1 voice solution and supports up to 60 voice channels in a single network module. The analog voice/fax network modules slide into Cisco 2600 and 3600 chassis slots and contain either one or two voice interface card (VIC) slots. The VICs currently available are two-port foreign exchange station (FXS), foreign exchange office (FXO), E&M 2-wire and 4-wire interfaces and a basic rate interface (BRI). The voice modules support all major industry codecs including G.711, G.723, G.726, G.728, G.729 and G.729a/b for customized solutions and to meet the need for high voice quality and bandwidth efficiency ATM networking services Four new multiport T1/E1 ATM network modules with Inverse Multiplexing over ATM (IMA) and 3 ATM OC-3 network module are now available for the 3600 series multiservice access platforms. These new multiport ATM modules allow service provider and enterprise customers to cost-effectively increase bandwidth, extending multiservice capabilities to remote-branch-office locations through ATM. These network modules support a robust set of ATM features including UBR, VBR-rt, VBR-nrt, and ABR ATM class of services, ATM Forum User Network Interface (UNI) 3.0, UNI 3.1, and UNI 4.0 signaling, Permanent Virtual Circuits (PVCs) and Switched Virtual Circuits (SVCs), and ATM Adaptation Layer 5 (AAL5) to name a few. Dial-up services The Cisco 3600 is a mid-range dial-up platform that fits between Cisco`s AccessPath and AS5300 products at the high end and the Cisco 2500 series access servers at the low end. Mixed-mode and high density ISDN and asynchronous configurations offer substantial flexibility in dial-up applications. Integrated digital modems (with support for PRI, BRI, CT1 and R2) and new integrated analog modems further enhance the dial access flexibility and scalability of the Cisco 3600. Dial-up services will first be supported on the Cisco 3660 in the first calendar quarter of the year 2000 (Q1 CY 2000). ISDN PRI networks The Cisco 3600 series offers high levels of cost effective ISDN PRI concentration. A Cisco 3640 configured with a Mixed Media LAN/ISDN PRI network module and three 2-port ISDN PRI network modules supports up to 186 (T1) or 240 (E1) B channels. This is a powerful and cost effective way to aggregate many branch offices and telecommuters onto one corporate network. ISDN PRI will first be supported on the Cisco 3660 in Q1 CY 2000. ISDN BRI networks For areas of the world where ISDN BRI services are more widely available or cost effective, the Cisco 3600 series supports many BRI interfaces. Configured with a LAN network module and three 8-port network modules, a Cisco 3640 connects up to 48 B channels. In this way, one system provides high-density BRI interface dial-up support and local LAN and WAN routing connectivity. ISDN BRI will first be supported on the Cisco 3660 in Q1 CY 2000. Serial networks With support for up to 48 synchronous serial interfaces on the Cisco 3660, the Cisco 3600 series and its RISC processor are the perfect complement to the Cisco 2600, 2500, 1700, and 1600 series. The Cisco 3600`s higher performance and modular design are appropriate for locations needing support for multiple T1/E1 links or the ability to change configurations in the future. Mixed WAN services Many corporate environments require support for a mixture of ISDN PRI, ISDN BRI, asynchronous serial, and synchronous serial connections. The Cisco 3600 series is ideal for this scenario. It allows migration between interfaces or simultaneous support of several technologies. Multiservice access solutions and applications The three Cisco 3600 models allow new levels of connectivity and performance for branch offices with their scalable size, slot density, and cost. Combinations of network modules provide new opportunities for branch offices needing more than a fixed-configuration solution. The Cisco 3620, for example, provides multiple LAN access server support for asynchronous, ISDN, analog modem and digital modem environments, which complements the Cisco 2500 series access servers. Alternatively, a Cisco 3620 adds multiple LAN capabilities to branch bank environments needing to assimilate legacy serial devices, connecting them all to a high-speed Frame Relay network. LAN-to-LAN services Consistent with its other capabilities, the Cisco 3600 series offers midrange LAN-to-LAN connectivity for branch offices needing a flexible modular platform.. The Cisco 2500 series, with a multitude of fixed configurations, offers cost effective branch office solutions including integrated routers and hubs, single and dual LAN routers, and multiple serial routers. The Cisco 3660, Cisco 3640, and Cisco 3620 routers are 6-, 4- and 2-slot multiservice access routers, respectively, whose LAN and WAN connections are configured by means of interchangeable network modules and WAN interface cards. The Cisco 3660 also incorporates 1 or optionally 2 integrated 10/100 (Ethernet/Fast Ethernet) ports.The following network modules are available for the Cisco 3660, Cisco 3640, and Cisco 3620 routers: Analog and Digital (T1) Voice Network Modules Single-Port High-Speed Serial Interface (HSSI) ATM 25 Mbps Network Module (Q1 CY 2000 for the Cisco 3660) ATM OC3 155 Mbps Network Module 6-, 12-, 18-, 24- and 30-digital modem network modules (Q1 CY 2000 for the Cisco 3660) LAN with modular WAN (WAN Interface Cards) 8 and 16 analog modem network modules (Q1 CY2000 for the Cisco 3660) Channelized T1, ISDN PRI and E1 ISDN PRI network modules (Q1 CY 2000 for the Cisco 3660) Combined FastEthernet and PRI network modules (Q1 CY 2000 for the Cisco 3660) 4- and 8-port ISDN BRI network modules (Q1 CY 2000 for the Cisco 3660) 16- and 32-port asynchronous network modules 4- and 8-port synchronous/asynchronous network modules 1- and 4-port Ethernet network modules 1-port Fast Ethernet (10/100) network modules (100BaseT-"TX" and Fiber - "FX") 8- and 16-port analog modem modules (Q1 CY 2000 for the Cisco 3660) 4-port serial network module Compression network module (Cisco 3620 and Cisco 3640, AIM for the Cisco 3660) In addition the Cisco 3660 supports 2 internal AIM slots. The Data Compression Advanced Integration Module (AIM) for the Cisco 3660 Series delivers a cost-effective option for reducing recurring wide-area network (WAN) costs and maximizing the benefit of the advanced bandwidth management features of Cisco IOS (R). The Data Compression AIM takes advantage of either of the two available Cisco 3660 internal AIM slots, ensuring that external slots remain available for components such as integrated analog voice/fax, digital voice/fax, ATM, channel service unit/digital service units (CSU/DSUs), analog and digital modems. The figure below shows how a vacant chassis slot on the Cisco 3640 accepts a mixed media network module, which in turn accepts a WAN interface card.
Cisco 3600 Series - Modular, High-Density Access Routers
Product Overview
Key Features and Benefits
Network Module Options for the Cisco 3600 Series
Note For detailed information about network modules (NMs), WAN interface cards (WICs), and Voice interface cards, (VICs), see the "NMs, WICs, and VICs for the Cisco 3600 Series, 2600 Series, and 1600 Series" section in this chapter.
|
Characteristic |
Description |
|---|---|
|
Network interfaces supported on the Cisco 3660, Cisco 3640 and Cisco 3620 |
Ethernet Fast Ethernet Token Ring Asynchronous Synchronous serial High Speed Serial Interface ISDN BRI (ST and U interfaces) (Q1 CY 2000 for the Cisco 3660) Channelized T1/ISDN PRI (with and without CSU) (Q1 CY 2000 for the Cisco 3660) Channelized E1/ISDN PRI (balanced and unbalanced) (Q1 CY 2000 for the Cisco 3660) Digital Modems (Q1 CY 2000 for the Cisco 3660) Analog Modems (Q1 CY 2000 for the Cisco 3660) Voice ATM 25 Mbps (Q1 CY 2000 for the Cisco 3660) ATM OC3 Multiport T1/E1 ATM with IMA (Inverse Multiplexing over ATM) |
|
Supported Cisco IOS software |
Cisco 3620/40: Release 11.1 AA , Release 11.2 P, 11.3, and 11.3T, 12.0, 12.0T Cisco 3660: Release 12.0(5)T |
|
Flash memory |
Cisco 3620/40: 8 MB of Flash memory (SIMM), expandable to 32 MB. PCMCIA Flash memory cards are also supported by each model, available in 4 to 16 MB sizes. Cisco 3660: 8MB of Flash in the enterprise models (3661-AC, 3661-DC, 3662-AC, 3662-DC) and 16MB in the telco models (3662-AC-CO, 3662-DC-CO) upgradable to 64MB |
|
DRAM memory (system and packet) |
Cisco 3620/40: 32 MB of DRAM memory. The Cisco 3640 is expandable to 128 MB. The Cisco 3620 is expandable to 64 MB. Cisco 3660: 32MB of SDRAM for both enterprise and telco models, upgradable to 256MB |
|
Standard components |
2 PCMCIA slots High-speed console and auxiliary ports Rack- and wall-mount kit Power supply and cord Console Cable |
|
Network module slots |
6 slots on the Cisco 3660 4 slots on the Cisco 3640 2 slots on the Cisco 3620 |
|
Processor type |
Cisco 3660: 225-MHz RISC QED RM5271 Cisco 3640: 100-MHz IDT R4700 RISC Cisco 3620: 80-MHz IDT R4700 RISC |
|
Dimensions (H x W x D) |
Cisco 3660: 8.7 x 17.5 x 11.8 in. (22.1 x 44.5 x 30 cm) Cisco 3640: 3.44 x 17.5 x 15.7 in. (8.7 x 44.5 x 40.01 cm) Cisco 3620: 1.75 x 17.5 x 13.5 in. (4.4 x 44.5 x 34.2 cm) |
|
Weight (average shipping) |
Cisco 3660: 43 lb (19.55 kg) includes chassis and 6 network modules Cisco 3640: 25 lb (13.6 kg), includes chassis and 4 network modules |
|
Description |
Specification |
|---|---|
|
Input voltage, AC power supply Current Frequency Power dissipation |
100 to 240 VAC, autoranging Cisco 3660: 2A;Cisco 3640: 2.0A; Cisco 3620: 1.0A 50 to 60 Hz Cisco 3660: 250W maximum per power supply;Cisco 3640: 140W (maximum); Cisco 3620: 60W |
|
Input voltage, DC power supply Current Power dissipation |
38 to 72 VDC Cisco 3660: 8.0A;Cisco 3640: 5.0A; Cisco 3620: 2.5A Cisco 3660: 250W maximum per power supply;Cisco 3640: 140W (maximum); Cisco 3620: 60W |
|
Operating humidity |
5 to 95%, noncondensing |
|
Operating temperature range |
32 to 104°F (0 to 40°C) |
|
Regulatory compliance |
FCC Part 15 Class B. For additional compliance information, refer to the 3600 Series Public Network Certification document. |
The Cisco 3620/40 uses two types of replaceable or upgradeable memory: DRAM memory and Flash memory. Both types of memory are implemented with SIMMs. Each router has two Flash SIMM sockets and four DRAM SIMM sockets. In the standard Flash memory configuration, the first socket contains a 8-MB Flash SIMM, and the second socket is empty. You can upgrade the Flash memory to 32 MB on both routers. Each Cisco 3600 router ships standard with 32 MB of DRAM. The Cisco 3640 is expandable to 128 MB of DRAM. The Cisco 3620 is expandable to 64 MB of DRAM.
The Cisco 3660 series uses two types of replaceable or upgradeable memory: SDRAM memory and Flash memory. Flash memory is implemented with SIMMs whereas SDRAM memory uses DIMMS. The 3660 has two Flash SIMM sockets and two SDRAM DIMM sockets. In the standard Flash memory configuration, the first socket contains a 8 MB Flash SIMM, and the second socket is empty. You can upgrade the Flash memory to 64 MB on a 3660 router. Each Cisco 3600 router ships standard with 32 MB of SDRAM and is upgradable to 256MB of SDRAM.
The Cisco 3600 series routers use a DRAM memory configuration that is different from other Cisco routers. Unlike the Cisco 4000 series routers, for example, which have separate physical locations for processor memory and packet memory, the Cisco 3600 series routers use one pool of DRAM memory. The DRAM is partitioned into processor memory and packet memory areas. For example, the memory of a 16-MB DRAM configuration is split into 12 MB for processor memory and 4 MB for the packet memory.
The Cisco 3600 allows you to load new system images using a PCMCIA Flash memory card. You can also load images from a local or remote PC through the console or auxiliary ports using the Xmodem or Ymodem protocols.
http://www.cisco.com/warp/public/cc/cisco/mkt/access/3600/prodlit/544_pp.htm
|
Characteristic |
Description |
|---|---|
|
Supported Cisco IOS software |
Cisco 3620/40: Release 11.1 AA , Release 11.2 P, 11.3, and 11.3T, 12.0, 12.0T Cisco 3660: Release 12.0(5)T |
| Part Description | Part Number |
|---|---|
| Cisco 3600 Series Chassis | |
| Cisco 3640 4-slot modular router with an AC power supply | CISCO3640 |
| Cisco 3640 4-slot modular router with a DC power supply | CISCO3640-DC |
| Cisco 3640 4-slot modular router for use with an AC redundant power system | CISCO3640-RPS |
| Cisco 3620 2-slot modular router with an AC power supply | CISCO3620 |
| Cisco 3620 2-slot modular router with a DC power supply | CISCO3620-DC |
| Cisco 3620 2-slot modular router for use with an AC redundant power system | CISCO3620-RPS |
| 10/100E Cisco 3660, 6-slot multiservice platform with IP Software, 8 MB flash, 32 MB SDRAM, one AC power supply, 19" rackmount kit Cisco 3660 | Cisco 3661-AC |
| 10/100E Cisco 3660, 6-slot multiservice platform with IP Software, 8 MB flash, 32 MB SDRAM, one DC power supply, 19" rackmount kit | Cisco 3661-DC |
| Dual 10/100E Cisco 3660, 6-slot multiservice platform with IP Software, 8 MB flash, 32 MB SDRAM, one AC power supply, 19" rackmount kit | Cisco 3662-AC |
| Dual 10/100E Cisco 3660, 6-slot multiservice platform with IP Software, 8 MB flash, 32 MB SDRAM, one DC power supply, 19" rackmount kit | Cisco 3662-DC |
| Dual 10/100E Cisco 3660, 6-slot multiservice platform with Telco Software, 16 MB flash, 32 MB SDRAM, one AC power supply, NEBS/ETSI Kit | Cisco 3662-AC-CO |
| Dual 10/100E Cisco 3660, 6-slot multiservice platform with Telco Software, 16 MB flash, 32 MB SDRAM, two DC power supplies, NEBS/ETSI Kit | Cisco 3662-DC-CO |
| 3600 Bundles | |
| 3640 BRI Dial Bundle: 1E2W,12DM ,4 BRI-S/T, IP IOS | 3640MBUNDLE-4B-S/T |
| 3640 BRI Dial Bundle: 1E2W,12DM ,4 BRI-U, IP IOS | 3640MBUNDLE-4B-U |
| 3640 BRI Dial Bundle: 1E2W,18DM ,8 BRI-S/T, IP IOS | 3640MBUNDLE-8B-S/T |
| 3640 BRI Dial Bundle: 1E2W,18DM ,8 BRI-U, IP IOS | 3640MBUNDLE-8B-U |
| 3620 PRI Dial Bundle: 1FE2CT1-CSU,24DM,IP IOS | 3620MBUNDLE-24DM |
| 3620 PRI Dial Bundle: 1FE2CE1-U,30DM,IP IOS | 3620MBUNDLE-30DM |
| 3600 Access Concentrator-48 MICA Modems+2 PRI/T1+Eth+IP IOS | AS3640-T1-48DM |
| 3600 Access Concentrator-60 MICA Modems+2 PRI/E1+Eth+IP IOS | AS3640-E1-60DM |
| Digital Modem Network Modules | |
| 6 digital modem network module | NM-6DM (Cisco 3660: Q1 CY 2000)) |
| 12 digital modem network module | NM-12DM (Cisco 3660: Q1 CY 2000)) |
| 18 digital modem network module | NM-18DM (Cisco 3660: Q1 CY 2000)) |
| 24 digital modem network module | NM-24DM (Cisco 3660: Q1 CY 2000)) |
| 30 digital modem network module | NM-30DM (Cisco 3660: Q1 CY 2000)) |
| 6 digital modem upgrade card | MICA-6MOD (Cisco 3660: Q1 CY 2000)) |
| Modem management technology license | MMTL-3600-xx (Cisco 3660: Q1 CY 2000)) |
| Analog Modem Network Modules (shared with Cisco 2600 series) | |
| 8-port Analog Modem Network Module | NM-8AM (Cisco 3660: Q1 CY 2000)) |
| 16-port Analog Modem Network Module | NM-16AM (Cisco 3660: Q1 CY 2000)) |
| Mixed Media Network Modules | |
| 1 Ethernet and 2 WAN interface card slots | NM-1E2W |
| 2 Ethernet and 2 WAN interface card slots | NM-2E2W |
| 1 Ethernet, 1 Token Ring, and 2 WAN interface card slots | NM-1E1R2W |
| 1-port F Ethernet 1-port Channelized T1/ISDN-PRI NM | NM-1FE1CT1 (Cisco 3660: Q1 CY 2000)) |
| 1-port F Ethernet 1-port Channelized T1/ISDN-PRI with CSU NM | NM-1FE1CT1-CSU (Cisco 3660: Q1 CY 2000)) |
| 1-port F Ethernet 1-port Channelized E1/ISDN-PRI Balanced NM | NM-1FE1CE1B (Cisco 3660: Q1 CY 2000)) |
| 1-port F. Ether.1Port Channelized E1/ISDN-PRI Unbalanced NM | NM-1FE1CE1U (Cisco 3660: Q1 CY 2000)) |
| 1-port F Ethernet 2-port Channelized T1/ISDN-PRI NM | NM-1FE2CT1 (Cisco 3660: Q1 CY 2000)) |
| 1-port F Ethernet 2-port Channelized T1/ISDN-PRI with CSU NM | NM-1FE2CT1-CSU (Cisco 3660: Q1 CY 2000)) |
| 1-port F Ethernet 2-port Channelized E1/ISDN-PRI Balanced NM | NM-1FE2CE1B (Cisco 3660: Q1 CY 2000)) |
| 1-port F.Ether. 2Port Channelized E1/ISDN-PRI Unbalanced NM | NM-1FE2CE1U (Cisco 3660: Q1 CY 2000)) |
| Channelized T1 and E1 ISDN PRI Network Modules (shared with Cisco 2600 series) | |
| 1-port channelized T1/ISDN PRI network module | NM-1CT1 (Cisco 3660: Q1 CY 2000)) |
| 1-port channelized T1/ISDN PRI with CSU network module | NM-1CT1-CSU (Cisco 3660: Q1 CY 2000)) |
| 2-port channelized T1/ISDN PRI network module | NM-2CT1 (Cisco 3660: Q1 CY 2000)) |
| 2-port channelized T1/ISDN PRI with CSU network module | NM-2CT1-CSU (Cisco 3660: Q1 CY 2000)) |
| 1-port channelized E1/ISDN PRI balanced network module | NM-1CE1B (Cisco 3660: Q1 CY 2000)) |
| 1-port channelized E1/ISDN PRI unbalanced network module | NM-1CE1U (Cisco 3660: Q1 CY 2000)) |
| 2-port channelized E1/ISDN PRI balanced network module | NM-2CE1B (Cisco 3660: Q1 CY 2000)) |
| 2-port channelized E1/ISDN PRI unbalanced network module | NM-2CE1U (Cisco 3660: Q1 CY 2000)) |
| ISDN BRI Network Modules (shared with Cisco 2600 series) | |
| 4-port ISDN BRI network module with an S/T interface | NM-4B-S/T (Cisco 3660: Q1 CY 2000) |
| 4-port ISDN BRI with NT1 network module | NM-4B-U (Cisco 3660: Q1 CY 2000) |
| 8-port ISDN BRI network module with an S/T interface | NM-8B-S/T (Cisco 3660: Q1 CY 2000) |
| 8-port ISDN BRI with NT1 network module | NM-8B-U (Cisco 3660: Q1 CY 2000) |
| Asynchronous/Synchronous Network Modules (shared with Cisco 2600 series) | |
| 4-port asynchronous/synchronous serial network module | NM-4A/S |
| 8-port asynchronous/synchronous serial network module | NM-8A/S |
| 16-port asynchronous serial network module | NM-16A |
| 32-port asynchronous serial network module | NM-32A |
| Ethernet Network Modules (shared with Cisco 2600 series) | |
| 1-port Ethernet network module | NM-1E |
| 4-port Ethernet network module | NM-4E |
| Fast Ethernet Network Module | |
| 1-port Fast Ethernet network module 100-Base-TX (RJ-45) | NM-1FE-TX |
| 1-port Fast Ethernet network module 100-Base-FX (Fiber optic) | NM-1FE-FX |
| Serial Network Module | |
| 4-port serial network module | NM-4T |
| Single port HSSI network module | NM-1HSSI |
| ATM Network Module (shared with Cisco 2600 series) | |
| Single port ATM OC-3 Multimode network module for 3600 | NM-1A-OC3MM |
| Single port ATM OC-3 Singlemode Intermediate Reach NM | NM-1A-OC3SMI |
| Single port ATM OC-3 Singlemode Long Reach Network Module | NM-1A-OC3SML |
| One port ATM 25Mbps network module | NM-1ATM-25 (Cisco 3660: Q1 CY 2000) |
| 4-port T1 ATM Network Module with IMA | NM-4T1-IMA |
| 8-port T1 ATM Network Module with IMA | NM-8T1-IMA |
| 4-port E1 ATM Network Module with IMA | NM-4E1-IMA |
| 8-port E1 ATM Network Module with IMA | NM-8E1-IMA |
| Voice Network Module (shared with Cisco 2600 series) | |
| One-slot Voice/fax Network Module | NM-1V |
| Two-Slot Voice/fax Network Module | NM-2V |
| Single-Port 24 Channel T1 Voice/Fax Network Module | NM-HDV-1T1-24 |
| Single-Port 24 Enhanced Channel T1 Voice/Fax Network Module | NM-HDV-1T1-24E |
| Dual-Port 48 Channel T1 Voice/Fax Network Module | NM-HDV-2T1-48 |
| Blank network module panel | NM-BLANK-PANEL= |
| Voice Interface Cards for NM-1V, NM-2V (shared with Cisco 2600 series) | |
| Two-port Voice Interface Card - E&M | VIC-2E/M |
| Two-port Voice Interface Card - FXO | VIC-2FXO |
| Two-port Voice Interface Card - FXO (for Europe) | VIC-2FXO-EU |
| Two-port Voice Interface Card - FXS | VIC-2FXS |
| Two-port Voice Interface Card - BRI (Terminal) | VIC-2BRI-S/T-TE (Cisco 3660: Q1 CY 2000)) |
| Voice Interface Cards for NM-HDX-XXX-XX (shared with Cisco 2600 series) | |
| 1-Port RJ-48 Multiflex Trunk-T1 | VWIC-1MFT-T1 |
| 2-Port RJ-48 Multiflex Trunk - T1 | VWIC-2MFT-T1 |
| 2-Port RJ-48 Multiflex Trunk-T1 with drop and insert | VWIC-2MFT-T1-DI |
| 1-Port RJ-48 Multiflex Trunk-E1 | VWIC-1MFT-E1 (Cisco 2600/3600: Q1 CY 2000) |
| 2-Port RJ-48 Multiflex Trunk - E1 | VWIC-2MFT-E1 (Cisco 2600/3600: Q1 CY 2000) |
| 2-Port RJ-48 Multiflex Trunk-E1 with drop and insert | VWIC-2MFT-E1-DI (Cisco 3600: Q1 CY 2000) |
| WAN Interface Cards (shared with Cisco 2600 series) | |
| Cisco 3600 Series Supported WAN Interface Cards. Many of these WICs are shared with Cisco 1600, 1700 and Cisco 2600 Series | |
| 1-Port RJ-48 Multiflex Trunk-T1 | VWIC-1MFT-T1 (Cisco 3660: Q1 CY 2000)) |
| 2-Port RJ-48 Multiflex Trunk-T1 with drop and insert | VWIC-2MFT-T1-DI (Cisco 3660: Q1 CY 2000)) |
| 1-Port RJ-48 Multiflex Trunk-E1 | VWIC-1MFT-E1 (Cisco 3660: Q1 CY 2000)) |
| 2-Port RJ-48 Multiflex Trunk-E1 with drop and insert | VWIC-2MFT-E1-DI (Cisco 3660: Q1 CY 2000)) |
| 1-port serial WAN interface card | WIC-1T |
| 1-port ISDN BRI WAN interface card3 | WIC-1B-S/T |
| 1-port ISDN BRI with NT1 WAN interface card3 | WIC-1B-U |
| 1-port, 4-wire, 56-kbps DSU/CSU WAN interface card | WIC-1DSU-56K4 |
| Blank WAN interface card panel | WIC-BLANK-PANEL= |
| Cisco 3660 AIM | |
| Compression Adv. Integration Module for Cisco 3660 | AIM-COMPR4 |
| Cisco 3660 SDRAM Memory | |
| 32-to-64 MB SDRAM memory factory upgrade for the Cisco 3660 | MEM3660-32U64D |
| 32-to-96 MB SDRAM memory factory upgrade for the Cisco 3660 | MEM3660-32U96D |
| 32-to-128 MB SDRAM memory factory upgrade for the Cisco 3660 | MEM3660-32U128D |
| 32-to-256 MB SDRAM memory factory upgrade for the Cisco 3660 | MEM3660-32U256D |
| 8-to-16 MB flash memory factory upgrade for the Cisco 3600 | MEM3600-8U16FS |
| 8-to-32 MB flash memory factory upgrade for the Cisco 3600 | MEM3600-8U32FS |
| 64 MB SDRAM memory field upgrade for the Cisco 3660 | MEM3660-64D= |
| 128 MB SDRAM memory field upgrade for the Cisco 3660 | MEM3660-128D= |
| 32 MB flash memory field upgrade for the Cisco 3660 | MEM3660-32FS= |
| Cisco 3640 DRAM Memory | |
| 4-MB DRAM SIMM | MEM3640-4D= |
| 8-MB DRAM SIMM | MEM3640-8D= |
| 16-MB DRAM SIMM | MEM3640-16D= |
| 32-MB DRAM SIMM | MEM3640-32D= |
| 16- to 24-MB DRAM upgrade | MEM3640-16U24D |
| 16- to 32-MB DRAM upgrade | MEM3640-16U32D |
| 16- to 48-MB DRAM upgrade | MEM3640-16U48D |
| 16- to 64-MB DRAM upgrade | MEM3640-16U64D |
| 16- to 128-MB DRAM upgrade | MEM3640-16U128D |
| Cisco 3620 DRAM Memory | |
| 8 MB DRAM for the Cisco 3640 (2x4 MB DRAM SIMMs) | MEM3640-2X4D= |
| 16MB DRAM for the Cisco 3640 (2x8 MB DRAM SIMMs) | MEM3640-2X8D= |
| 32MB DRAM for the Cisco 3640 (2x16 MB DRAM SIMMs) | MEM3640-2X16D= |
| 64MB DRAM for the Cisco 3640 (2x32MB DRAM SIMMs) | MEM3640-2X32D= |
| 16- to 32-MB DRAM upgrade | MEM3620-16U32D |
| 16- to 48-MB DRAM upgrade | MEM3620-16U48D |
| 16- to 64-MB DRAM upgrade | MEM3620-16U64D |
| Cisco 3600 Series Flash Memory | |
| 4-MB Flash memory SIMM | MEM3600-4FS= |
| 8-MB Flash memory SIMM | MEM3600-8FS= |
| 16-MB Flash memory SIMM | MEM3600-16FS= |
| 32 MB SDRAM memory field upgrade for the Cisco 3660 | MEM3660-32D= |
| 8 to 16-MB Flash upgrade | MEM3600-8U16FS |
| 8 to 32-MB Flash upgrade | MEM3600-8U32FS |
| 8-to-64 MB flash memory factory upgrade for the Cisco 3660 | MEM3600-8U64FS |
| 4-MB blank Flash memory PCMCIA card | MEM3600-4FC |
| 8-MB blank Flash memory PCMCIA card | MEM3600-8FC |
| 2 MB PCMCIA Flash Memory Card plus Digital Modem Firmware for the Cisco 3600 Series | MEM56K-3600(=) |
| Cisco 3600 Power Supply Options | |
| AC power supply and spare for the Cisco 3660 | PWR-3660-AC(=) |
| DC power supply and spare for the Cisco 3660 | PWR-3660-DC(=) |
| Cisco 3640 AC power supply | PWR-3640-AC= |
| Cisco 3640 DC power supply | PWR-3640-DC= |
| Cisco 3620 AC power supply | PWR-3620-AC= |
| Cisco 3620 DC power supply | PWR-3620-DC= |
| Cisco 3620/40: 600W redundant AC-input power system | PWR-600-AC-RPS-NCAB |
| Cisco 3620/40: RPS 22/18 two-to-one DC power cable | CAB-RPSY-2218(=) |
| Cisco 3620/40: RPS 22/18 one-to-one DC power cable | CAB-RPS-2218(=) |
| Cisco 3640 redundant power system field upgrade (requires PWR-600-AC-RPS-XXX) | ACS-3640RPS= |
| Cisco 3620 redundant power system field upgrade (requires PWR-600-AC-RPS-XXX) | ACS-3620RPS= |
| Cisco 3600 Cable and Rack-Mount Kit Options | |
| Male DTE V.35 cable, 10 ft | CAB-V35MT |
| Female DCE V.35 cable, 10 ft | CAB-V35FC |
| Male DTE EIA/TIA-232 cable, 10 ft | CAB-232MT |
| Female DCE EIA/TIA-232 cable, 10 ft | CAB-232FC |
| Male DTE EIA/TIA-449 cable, 10 ft | CAB-449MT |
| Female DCE EIA/TIA-449 cable, 10 ft | CAB-449FC |
| Male DTE X.21 cable, 10 ft | CAB-X21MT |
| Female DCE X.21 cable, 10 ft | CAB-X21FC |
| Male DTE EIA/TIA-530 cable, 10 ft | CAB-530MT |
| MIP-CT1: DSX1 to CSU DB-15 thru cable | CAB-7KCT1DB15 |
| MIP-CT1: DSX1 to CSU DB-15 null cable | CAB-7KCT1NULL |
| E1 cable ISDN PRI, 10 ft | CAB-E1-PRI |
| E1 cable Twinax 120 ohm, balanced, 9.8 ft | CAB-E1-TWINAX |
| E1 cable DB-15 120 ohm, balanced, 16 ft | CAB-E1-DB15 |
| E1 cable BNC 75 ohm, unbalanced, 16 ft | CAB-E1-BNC |
| Auxiliary and console port cable kit | ACS-3600ASYN |
| 19-inch rack mount kit for the Cisco 3660 | ACS-3660RM-19= |
| 19-inch rack-mount kit for the Cisco 3640 | ACS-3640RM-19= |
| 19-inch rack-mount kit for the Cisco 3620 | ACS-3620RM-19= |
| 23-inch rack mount kit for the Cisco 3660 | ACS-3660RM-23= |
| 24-inch rack-mount kit for the Cisco 3640 | ACS-3640RM-24= |
| 24-inch rack-mount kit for the Cisco 3620 | ACS-3620RM-24= |
| Cisco 3660, 3620 and 3640 SMARTnet maintenance | See the chapter "Service and Support," later in the catalog. |
For configuration and ordering information for network modules, WAN interface cards, and voice/fax interface cards for the Cisco 3600 series routers, see the "NMs, WICs, and VICs for the Cisco 3600 Series, 2600 Series, and 1600 Series" section.